About the PC-3000 Flash
Product Code: AP-ACE-PC3000-FLASH
The PC-3000 Flash is a hardware-software system intended for recovering data from all NAND based devices (USB Flash Drives, SD, MS, xD, MMC, CF, VoiceRecorder, iPhone etc.) in such cases where there is no access through the authorized drive interface. The PC-3000 Flash can make low-level diagnostics and repairs of SSD drives in technological mode.
Data recovery from USB drives, memory cards, mobile storage devices
The PC-3000 Flash is based on ACE Lab’s own “know-how” technology of getting direct access to Flash memory microchips. The microchip is desoldered from the storage device and read by our special device – the “Flash reader” – providing access to data when the controller is damaged. This technology greatly increases the chances of successful data recovery even when the storage device is physically damaged.
The PC-3000 Flash contains an up-to-date large memory chip database that allows you to identify and read microchips in automatic mode. Complicated stack organizations which consist of several parts are automatically detected by the PC-3000 Flash as well.
Microchips are becoming more high-tech, new principles of functionality are being created and new requirements and protocols for microchips appear, for example, TLC microchips. Because of this constant change, the Flash Reader software is continuously updated to provide support for new microchips in accordance with the strict requirements necessary for correct functionality.
The PC-3000 Flash is capable of automatically checking and downloading the latest libraries via the Internet:
- Memory chip library
- ECC algorithm library
- XOR library
- Library of Analysis algorithms, preparation and research methods
- Page format library
- Supply circuit library
- Rereading Modes reference book
- Dynamic XOR library
If there are any new resources, they are downloaded from the ACE Laboratory server and updated. Here is the list of currently supported memory chips and controllers
In addition to a great variety of manual and visual modes, the PC-3000 Flash has automatic data recovery methods which help solve both simple and difficult cases. For example, in most cases, Complex analysis allows for making all prior operations automatically and get access to user data.
With the PC-3000 Flash, you can recover data with “one-click” using the PC-3000 Flash Global Solution Centre. It is a dream come true for data recovery specialists!
The Global Solution Centre is updated daily!
The list of controllers supported by “Global Solution Centre” can be reviewed here
The PC-3000 Flash Kit Includes:
- PC-3000 Flash Reader – 1pcs
- TSOP-48 Adapter – 1 pc.
- LGA/TLGA-52 adapter (14×18) – 1pcs.
- BGA-152 adapter – 1 pcs.
- Circuit Board adapter – 1 pcs.
- USB 2.0 Defender Cable – 1 pcs.
- PC-3000 Flash Software – 1 DVD
- User Manual – 1 pcs.
A new solution, ideal for engineers who focus on data recovery from MicroSD, SecureDigital and UFD devices in monolith form factors.
- Multiboard Adapter – 1 pc.
- Replaceable Monolith Modules – 2 pcs.
- LGA-52/TSOP-48 Module – 1 pc.
- BGA-152/VBGA-100 Module – 1 pc.
- Card Adapter – 1 pc.
New Monolith Set adapters are supported by the latest PC-3000 Flash software version 7.0.5.
Optimal for experts who recover data from less frequent microchips seen in Flash storage devices in a typical, non-monolith form factor. Thus, engineers can be prepared to work productively even with the rarest cases.
- TSSOP-56 adapter – 1 pc.
- VBGA-100 adapter – 1 pc.
- LGA/TLGA-52 [12×17] adapter – 1 pc.
Both Sets allow you to save up to 35% on the bundle purchase compared to the cost you would pay buying these adapters separately.