ACELab PC-3000 SAS 6 Gbit/s

HDD Repair
Home » ACELab Products » PC-3000 SAS 6 Gbit/s

 About the PC-3000 SAS 6 Gbit/s Systems

The PC-3000 SAS 6 Gbit/s RAID Professional System is a professional solution for data recovery from damaged RAID storage based on SAS (Serial Attached SCSI) or SCSI drives and supporting the following configurations: Stripe, Mirror, JBOD, 1E Offset, 1E Adjacent, 4, 5, 5E, 5EE, 6, 6 Adaptec, any combined (10, 50, 51, 60…), and table-defined custom levels, as well as WSS (Windows Storage Spaces), ZFS RAID-Z, BtrFS RAID, Apple Fusion Drive (HFS+, APFS).

PC-3000 SAS 6 Gbit/s RAID System consists of the PC-3000 SAS 6 Gbit/s System and Data Extractor SAS RAID Edition.

PC-3000 SAS 6Gbit/s System

Product Code: AP-ACE-SAS-6GB

SAS-6Gbit
The PC-3000 SAS 6 Gbit/s is a hardware-software solution intended for testing and restoring damaged HDDs with SAS (Serial Attached SCSI) or SCSI based interfaces.

The PC-3000 SAS 6 Gbit/s coupled with the Data Extractor SAS forms the PC-3000 SAS 6 Gbit/s Professional System, which allows you to recover data from SAS or SCSI based HDDs. To repair these HDDs, you only need the PC-3000 SAS 6 Gbit/s – for data recovery you need both the PC-3000 SAS 6 Gbit/s and the Data Extractor SAS.

PC-3000 SAS Kit:

  • PC-3000 SAS 6 Gbit/s controller – 1 pc
  • SAS SFF-8482/SATA/Molex (100cm) cable – 4 pcs
  • HDD SCSI (50 cm) power cable – 4 pcs
  • PC-3000 SAS software available in the Technical Support Portal
  • User manual – 1 book

The new High Performance SAS controller PC-3000 SAS is a PC extension board for the PCI SAS 6 Gbit/s x4 bus that takes two adjacent slots which allows for working with four HDDs simultaneously.

Four independent channels provide up to a 6 Gbit/s data transfer rate for each channel according to the SAS-2.0. The data transfer speed depends on the speed of the connected drives.

PC-3000 SAS 6 Gbit/s RAID System

Product Code: AP-ACE-SAS-6GB-RAID

PC-3000 SAS Raid

The Data Extractor SAS RAID Edition is a specialized software product intended for recovering data from RAID storage devices. Functioning in tandem with the PC-3000 SAS hardware-software product, it forms the PC-3000 SAS RAID Professional System.

 

  • The Data Extractor SAS RAID Edition includes all the features of Data Extractor SAS;
  • A wide range of supported levels is provided:
    • “simple” RAID levels: 0 (Stripe), 1 (Mirror), JBOD, 1E Offset, 1E Adjacent, 4, 5, 5E, 5EE, 6, 6 Adaptec
    • Combined levels: 10, 50, 60, 51, etc. due to the possibility to create RAID from RAID
    • Tabular presentation enables to define optional configurations.
    • WSS (Windows Storage Spaces) ZFS RAID-Z, BtrFS RAID, Apple Fusion Drive (HFS+, APFS)
  • Restoring the software RAID and NAS
  • A wide variety of RAID members are supported:
    • Up to four damaged HDDs connected to the PC-3000 SAS ports
    • Storage devices connected in standard way (including SCSI and SAS)
    • Image-files
    • Data Extractor tasks created earlier with copies to files
    • Previously created virtual RAIDs.
    • Drives connected to the PC-3000 Express ports (if both systems are plugged into one computer)
  • Advanced features for operations with damaged drives within a RAID
  • Unique modes of automatic and interactive detection for RAID configurations
  • Software emulation of RAID controller:
    • Mounting of virtual RAID to the Operating System
    • High read speed (approximately 1.3 GB/sec for a Stripe of 4 SSDs connected to the PC-3000 SAS ports)
    • Recovering data from redundant arrays