ACELab PC-3000 UDMA System
Product Code: AP-ACE-PC3000-UDMA
The PC-3000 UDMA Professional System consists of PC-3000 UDMA hardware-software and Data Extractor UDMA software.
The Data Extractor UDMA
The Data Extractor UDMA is a specialized software product functioning in tandem with the PC-3000 UDMA hardware-software product. It is intended for recovering data from SATA (Serial p7ATA) and PATA (IDE) HDD 3.5″, 2.5″, 1.8″, 1.0″, USB HDD, SSHD (Solid State Hybrid Drive) etc. Together with the PC-3000 UDMA it forms a comprehensive professional solution for your data recovery business.
Works with all of the most popular file systems: FAT, exFAT, NTFS, EXT2/3/4, HFS+, UFS1/2, XFS, ReiserFS, VMFS
VMDK (VMWare) images are supported
Data Extractor UDMA has modes used in forensic investigations
Data Extractor UDMA is capable of working with 2 HDD drives simultaneously. Drives can be connected to PC-3000 UDMA ports (1xSATA, 1xSATA/PATA), motherboard ports (xSATA, xUSB etc) or represented as HDD images.
PC-3000 UDMA allows you to repair physically damaged HDD drives in technological mode. SATA drives use UDMA133 reading mode while PATA drives use UDMA100 reading mode.
Using the Data Extractor UDMA you can create full (sector-by-sector) or partial data copies from the damaged drive to a good one connected to the port of the PC-3000 UDMA board, motherboard or in image-files.
Supported file systems: FAT, exFAT, NTFS, EXT2/3/4, HFS+, UFS1/2, XFS, ReiserFS, VMFS
Supported VM images: Flat (file-image), VMDK
Interface: PCI Express 1x
Ports: 2 SATA, 1 PATA
Reading modes: UDMA133/100/66/33, PIO4/3/2/1/0
Task creation: for HDD connected to PC-3000 UDMA ports, connected in a standard way, for image-files
Maximum number of working tasks for damaged HDDs: 2
Maximum number of recovered drives per one task: 1
The PC-3000 UDMA Professional System is available in the following packages:
The Data Extractor UDMA RAID Edition
The Data Extractor UDMA RAID Edition is a specialized software product intended for recovering data from RAID storage devices. Functioning in tandem with the PC-3000 UDMA p8hardware-software product, it forms the PC-3000 UDMA RAID Professional System.
The Data Extractor UDMA RAID Edition includes all the features of the Data Extractor UDMA
A wide range of supported levels is provided:
“simple” RAID levels: 0 (Stripe), 1 (Mirror), JBOD, 1E Offset, 1E Adjacent, 4, 5, 5E, 5EE, 6, 6 Adaptec
Combined levels: 10, 50, 60, 51, etc. due to the possibility to create RAID from RAID
Tabular presentation enables to define optional configurations
Restoring the software RAID and NAS
Wide variety of RAID members:
Up to two damaged HDDs connected to the PC-3000 UDMA ports
Storage devices connected in standard way (including SCSI and SAS)
Data Extractor tasks created earlier with copies to files
Previously created virtual RAIDs
Advanced functions of working with damaged HDDs inside RAID
Unique modes of automatic and interactive detection for RAID configurations
Software emulation of RAID controller:
Mounting of virtual RAID to Operating System
High read speed (more than 200 MB/sec for a Stripe of 2 HDDs connected to the PC-3000 UDMA ports)
Recovering data from redundant arrays
Supported RAID levels:
simple levels: 0 (Stripe), 1 (Mirror), JBOD, 1E Offset, 1E Adjacent, 4, 5, 5E, 5EE, 6, 6 Adaptec
any combined levels: 10, 50, 60, 51 etc.
configurations defined by table description
Software-based RAID: LDM and mdadm structure analysis
Possible array members: up to 2 HDDs connected to the PC-3000 UDMA ports
HDDs to computer ports connected in a standard way
previously created Data Extractor tasks with copying to file
previously created virtual RAIDs
Maximum number of damaged HDDs per one task: 2 HDDs connected to the PC-3000 UDMA ports
Read speed of virtual RAID: more than 200 MB/sec, for a Stripe with 2 HDDs, connected to the PC-3000 UDMA ports (it depends on the configuration and read speed of HDD)